======= Basic electronic structure calculation =======
In this exercise, you will perform a first basic electronic structure calculation to obtain the molecular orbitals (**MO**s) of Ethene: Your calculations will produce a list of occupied and non occupied MOs and a series of ''*.cube'' files, that allow the visualization of the orbitals with //VMD//.
It is recommended to install and run //VMD// on your local machine. //VMD// can be [[http://www.ks.uiuc.edu/Development/Download/download.cgi?PackageName=VMD|downloaded free of charge]] after registering with your name and email address. To load and render the ''*.cube'' files on your local //VMD// you first have to transfer them from the server to your machine by using one of the transfer tools recommended on the [[exercises:2017_uzh_cmest:login|First Login]] page.
===== 1. Step: Run the calculation =====
Create a new directory for this exercise and run a CP2K calculation with the following (commented) input file (look at the [[exercises:2017_uzh_cmest:first_simulation_run|first exercise again to figure out how to run a simulation]]):
&GLOBAL
PROJECT ethene
RUN_TYPE ENERGY
PRINT_LEVEL MEDIUM
&END GLOBAL
&FORCE_EVAL
METHOD Quickstep ! Electronic structure method (DFT,...)
&DFT
&PRINT
&MO_CUBES ! Controls which MOs are written to cube-files.
NHOMO 5
NLUMO 5
&END MO_CUBES
&END PRINT
&POISSON ! Solver requested for non periodic calculations
PERIODIC NONE
PSOLVER WAVELET ! Type of solver
&END POISSON
&QS ! Parameters needed to set up the Quickstep framework
METHOD GAPW ! Method: gaussian and augmented plane waves
&END QS
&SCF ! Parameters controlling the convergence of the scf. This section should not be changed.
MAX_ITER_LUMOS 10000
EPS_SCF 1.0E-6
SCF_GUESS ATOMIC
MAX_SCF 60
EPS_LUMOS 0.000001
&OUTER_SCF
EPS_SCF 1.0E-6
MAX_SCF 6
&END
&END SCF
&XC ! Parameters needed to compute the electronic exchange potential
&XC_FUNCTIONAL NONE ! No xc functional
&END XC_FUNCTIONAL
&HF ! Hartree Fock exchange. In this case is 100% (no fraction specified).
&SCREENING ! Screening of the electronic repulsion up to the given threshold.
EPS_SCHWARZ 1.0E-10 ! Threshold specification
&END SCREENING
&END HF
&END XC
&END DFT
&SUBSYS
&CELL
ABC 10 10 10
PERIODIC NONE ! Non-periodic calculations. That's why the POISSON section is needed
&END CELL
&TOPOLOGY ! Section used to center the atomic coordinates in the given box. Useful for big molecules
&CENTER_COORDINATES
&END
&END
&COORD
C -2.15324 3.98235 0.00126
C -0.83403 4.16252 -0.00140
H -0.25355 3.95641 0.89185
H -0.33362 4.51626 -0.89682
H -2.65364 3.62861 0.89669
H -2.73371 4.18846 -0.89198
&END COORD
&KIND H ! Basis set and potential for H
&BASIS
2
1 0 0 3 1
18.73113700 0.03349460
2.82539370 0.23472695
0.64012170 0.81375733
1 0 0 1 1
0.16127780 1.00000000
&END
POTENTIAL ALL
&POTENTIAL
1 0 0
0.20000000 0
&END
&END KIND
&KIND C ! Basis set and potential for C
&BASIS
4
1 0 0 6 1
3047.52490000 0.00183470
457.36951000 0.01403730
103.94869000 0.06884260
29.21015500 0.23218440
9.28666300 0.46794130
3.16392700 0.36231200
1 0 1 3 1 1
7.86827240 -0.11933240 0.06899910
1.88128850 -0.16085420 0.31642400
0.54424930 1.14345640 0.74430830
1 0 1 1 1 1
0.16871440 1.00000000 1.00000000
1 2 2 1 1
0.80000000 1.00000000
&END
POTENTIAL ALL
&POTENTIAL
4 2 0
0.34883045 0
&END
&END KIND
&END SUBSYS
&END FORCE_EVAL
===== 2. Step =====
If the calculation was performed correctly, a number of new files should have been written:
$ ls *.cube
ethene-WFN_00004_1-1_0.cube ethene-WFN_00008_1-1_0.cube ethene-WFN_00012_1-1_0.cube
ethene-WFN_00005_1-1_0.cube ethene-WFN_00009_1-1_0.cube ethene-WFN_00013_1-1_0.cube
ethene-WFN_00006_1-1_0.cube ethene-WFN_00010_1-1_0.cube
ethene-WFN_00007_1-1_0.cube ethene-WFN_00011_1-1_0.cube
===== 3. Step =====
Each cube-file contains the electronic density of one MO mapped onto a regular 3D-grid. Not all MOs were written to a cube-file, this is controlled by the ''PRINT_MO'' section. Their filenames tell you to which MO a cube-file belongs. For example ''ethene-WFN_00005_1-1_0.cube'' contains the 5th orbital.
Use VMD to visualize the cube-files:
- Open one ''.cube'' file at a time in //VMD//
- To visualize the molecule (sometimes it's not visible by default):\\ go to **Graphics > Representations > Draw style** and set **Drawing Method** to **CPK**
- Add a second representation by clicking on **Create Rep**
- In this second representation set **Drawing Method=Isosurfaces** and **Draw=Wireframe**
- Finally set the **Isovalue** of to a reasonable value, eg. 0.1 .
- To visualize the positive and the negative part of an orbital simultaneously, you will have to add a third representation with a negative **Isovalue**, e.g. -0.1 .
- To give the two representations different colors, set their **Coloring Method=ColorID** and choose different ids.
What you get should look similar to this:
{{ ethene_pi_orbital.png |}}
===== Questions =====
- Compare the new input file with the one from the [[first_simulation_run|previous exercise]]: which keywords changed? which section is missing, respectively new? Lookup the description of the changed keywords and sections in the [[https://manual.cp2k.org/|CP2K Manual]]
- From the output: What are the energies of the Highest Occupied MO (**HOMO**), Lowest Unoccupied MO (**LUMO**), and the band-gap (in electronvolt)?
- Use VMD to identify the shape of the $\pi$ and $\pi^*$ orbitals (submit images like the one from above)
- Repeat the calculation for Propene and find again the **HOMO**, **LUMO** and band-gap energies.
- The eigenvalues are given in Hartree (//Eh//) while the band-gap is stated directly in electronvolt
- Lookup the molecular orbital diagram of Ethen to identify which MOs and therefore which cube files you need to open.
- Use the [[http://cccbdb.nist.gov/|Computational Chemistry Comparison and Benchmark DataBase]] to lookup the calculated geometry for Propene (CH2CHCH3), use the geometry optimized using a Hartree-Fock calculation and the ''6-311+G(3df,2pd)'' basis set.